The Herpstat 4 features four probe & outlet jacks which are individually configurable. Safety was our goal with this device. We added a mechanical relay that can be enabled to cut the power circuit to all four outlets in case a solid state component fails. Humidity control is also built into this device which can be as simple as timed misting sessions or full humidity control with our optional humidity sensor. We've added a soft startup feature to slowly add power on initial starts as well as a user selectable ramping between day and night time temperature settings as well as light ramping. A new revolutionary auto power matching algorithm constantly adjusts the power output to get the best regulation possible. High and low temperature tracking now also records the time and day of the event.
Version 2 added features include a new fanless control board for
silent operation, Basking Assist mode that now provides compatibility with
heating lamps as a heat source, both Dimming and Pulse proportional heating
modes and a replacable power cord.
The Herpstat 4 comes with four temperature probes and power
cord. Optional humidity sensing probes are available. Check out the manual in
our download section for screen shots of the setup procedure.
·Four grounded outlets capable of true proportional
·Constantly monitors and adjusts amount of heat necessary to
maintain a target temperature (Usable range from 40°F to 150°F or 4°C to
·Outputs 1 & 2 configurable for Heating/Cooling/Lighting.
Outputs 3 & 4 can be configured for Heating/Cooling/Humidity/Lighting with
simulated sunrise/sunset and moonlight features.
·Humidity control with timed sessions or regulated with an
·Silent fanless design
·Basking assist feature supports basking lights as a heat
·Safety Relay can disconect power to all four outlets if the an
·Soft startup slowly applies power during initial warmups.
·User selectable temperature and light ramping allows day to
night changes to occur slowly. (Up to 10 hours)
·Sensor Matching allows the user to digitally calibrate the
sensor output to match other equipment.
·Night Drop feature built in with real time clock allows
individual night drop settings for each output.
·Cooling function allows control of basic cooling devices.
·High / Low temperature tracking helps monitor heating system
and enclosure efficiency.
·Individually selectable High / Low temperature threshold
·Precision sensors with internal resolution of .1125 °F and is
accurate to ± .9 °F
·Display and setting in tenths of a degree.
·All settings are retained in memory even if power is
·Power Outage detection / tracking.
·Temperature can be set / displayed in Fahrenheit or
·Easy to read backlit LCD display.
·Removable sensors allow for easy replacement if
·Each output is fused separately keeping an outage on one output
from affecting the other.
·Audible alarm system
·Internal error detection shuts off heat if sensor fails or is
·Security Passcode option deters vandals.
·400 Watt rating for each output (1600 watts total output)
sufficient for most incubators, rack systems, enclosures, and vivariums.
·1 year limited warranty
Supplies for Sale
Images & Videos